1. General Information Disclaimer

The information published on the X Steel Frame LLC website at https://xsteelframe.com is provided for general informational and marketing purposes only. It is intended to give prospective B2B clients a general understanding of who we are, what we do, and the nature of our services in the cold-formed steel (CFS) and light gauge steel (LGS) construction industry.

Nothing on this website constitutes, or should be construed as, professional engineering advice, architectural advice, structural design, legal advice, financial advice, or any other form of licensed professional consultation. All service descriptions, technical overviews, and process descriptions are illustrative and intended to describe general capabilities — they do not represent the specific deliverables of any project engagement.

You should not act or refrain from acting on the basis of information found on this website without first seeking advice from a qualified and licensed professional appropriate to your specific circumstances and jurisdiction.

2. No Professional Engineering Advice

X Steel Frame LLC is a project coordination and technical support company. While our team has extensive experience in CFS/LGS systems, engineering coordination, and Florida Building Code requirements, X Steel Frame LLC does not itself hold a Florida Professional Engineering (PE) license and does not provide licensed engineering services directly through this website or otherwise.

References on this website to “engineering coordination,” “code-aware systems,” “structural coordination,” or “engineering support” describe our role in coordinating and facilitating project engineering activities — which are performed by or in conjunction with licensed, third-party engineering firms and professionals.

Any structural, engineering, or design decisions must be made by or reviewed and approved by a licensed Professional Engineer (PE) registered in the applicable jurisdiction. Do not rely solely on information from this website for any structural or code-compliance decision.

3. No Guarantee of Results

X Steel Frame LLC makes no warranties, representations, or guarantees — express or implied — that engaging our services will result in any specific project outcome, timeline, cost savings, code approval, permit issuance, or other result. Construction project outcomes depend on a wide range of variables outside our control, including but not limited to:

• The accuracy and completeness of information provided by clients
• Third-party contractor, subcontractor, and manufacturer performance
• Site conditions and unforeseen field circumstances
• Local building authority interpretations and timelines
• Material availability and supply chain conditions
• Weather, permitting delays, and regulatory changes

Any descriptions of our capabilities, past experience, or project approach on this website represent general operational practices and do not constitute guarantees of results for any specific client or project.

4. Accuracy of Information

While we make reasonable efforts to ensure that the content on this website is accurate, complete, and up to date, X Steel Frame LLC makes no representations or warranties of any kind, express or implied, about the accuracy, reliability, suitability, or completeness of any information, products, services, or related graphics contained on the website for any purpose.

The CFS/LGS construction industry is subject to rapidly evolving codes, standards, materials technology, and market conditions. Information on this website may not reflect the most current industry standards, Florida Building Code requirements, or SFIA technical guidance. Always verify technical information against the most current published standards and consult with licensed professionals.

X Steel Frame LLC reserves the right to modify, correct, update, or remove any content on this website at any time without notice and without liability.

5. Code & Regulatory Disclaimer

References to the Florida Building Code, High-Velocity Hurricane Zone (HVHZ) requirements, International Building Code (IBC), ASTM standards, SFIA technical guidelines, or other regulatory or industry standards on this website are for general informational purposes only. They do not constitute legal interpretation of those standards, legal advice, or a guarantee of code compliance for any specific project or application.

Building codes, regulations, and local ordinances are subject to amendment, local adoption variations, and interpretation by the applicable Authority Having Jurisdiction (AHJ). Compliance with applicable codes must be verified by licensed professionals for each specific project and jurisdiction. X Steel Frame LLC is not responsible for any project’s failure to comply with applicable codes based on reliance on general information published on this website.

6. Third-Party Content & Links

Our website may contain links to third-party websites, resources, and partner organizations including FRAMECAD and the Steel Framing Industry Association (SFIA). These links are provided for convenience and informational purposes only.

X Steel Frame LLC does not control, endorse, or assume responsibility for the content, accuracy, privacy practices, or availability of any third-party websites or resources. We are not responsible for any loss or damage that may arise from your use of those sites. The inclusion of any link does not imply our recommendation of that site or its operators.

7. Product & Manufacturer Disclaimer

X Steel Frame LLC operates as a value-added reseller and project coordinator for CFS/LGS products manufactured by third-party SFIA-certified partner manufacturers. We do not manufacture cold-formed steel profiles, studs, trusses, or components ourselves.

Product specifications, performance data, certifications, and technical properties described in connection with products resold by X Steel Frame LLC are provided by the respective manufacturers. While we work with reputable, SFIA-certified manufacturers, X Steel Frame LLC makes no independent warranty regarding the specifications, performance, fitness for purpose, or quality of third-party manufactured products beyond what is provided by the manufacturer.

Product suitability for any specific application must be verified by a licensed engineer in accordance with applicable project specifications and codes.

8. Limitation of Liability

TO THE FULLEST EXTENT PERMITTED BY APPLICABLE FLORIDA AND FEDERAL LAW, X STEEL FRAME LLC AND ITS MEMBERS, MANAGERS, EMPLOYEES, AGENTS, AND SUCCESSORS SHALL NOT BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES — INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS, DATA, GOODWILL, BUSINESS OPPORTUNITY, OR PROPERTY DAMAGE — ARISING OUT OF OR IN CONNECTION WITH:

• Your use of or reliance on any information published on this website
• Any errors, omissions, or inaccuracies in website content
• Any decision made or action taken in reliance on information found on this website
• Temporary unavailability of the website
• Your use of any third-party website linked from this site

This disclaimer does not limit liability in ways not permitted by applicable law, including liability for fraud, willful misconduct, or personal injury caused by our negligence. Some jurisdictions do not allow exclusion of certain implied warranties or limitations on certain damages, so some of the above limitations may not apply to you.

9. Industry Membership & Partnership References

References on this website to X Steel Frame LLC’s membership in the Steel Framing Industry Association (SFIA) and technology partnership with FRAMECAD are factual statements about our organizational affiliations. These references:

• Do not imply that SFIA or FRAMECAD endorse, guarantee, or certify the results of any specific project or service delivered by X Steel Frame LLC
• Do not imply that SFIA or FRAMECAD have reviewed or approved any specific content on this website
• Are subject to change if membership or partnership status changes; we will update this website accordingly

For authoritative information about SFIA standards and programs, please visit steelframing.org. For information about FRAMECAD technology, please visit framecad.com.

10. Contact Us

If you have any questions about the limitations described in this Disclaimer, or would like to discuss a specific project or service requirement, please contact us directly. We are always happy to clarify the scope of our services in the context of your specific needs.